1-[2-(Trifluoromethyl)phenyl]ethylamine, 2-(1-Aminoethyl)benzotrifluoride
Benzenemethanamine, a-methyl-2-(trifluoromethyl)-
CAS: 273384-78-4
Molecular Formula: C9H10F3N
1-[2-(Trifluoromethyl)phenyl]ethylamine, 2-(1-Aminoethyl)benzotrifluoride - Names and Identifiers
1-[2-(Trifluoromethyl)phenyl]ethylamine, 2-(1-Aminoethyl)benzotrifluoride - Physico-chemical Properties
| Molecular Formula | C9H10F3N |
| Molar Mass | 189.18 |
| Density | 1.18 g/cm3 |
| Boling Point | 68.7-71.1 |
| Flash Point | 78.8 °C |
| Water Solubility | at 25 deg C (mg/L): 4087 |
| Storage Condition | under inert gas (nitrogen or Argon) at 2–8 °C |
1-[2-(Trifluoromethyl)phenyl]ethylamine, 2-(1-Aminoethyl)benzotrifluoride - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | R34 - Causes burns R36 - Irritating to the eyes |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. |
| UN IDs | 2735 |
| Hazard Note | Irritant |
1-[2-(Trifluoromethyl)phenyl]ethylamine, 2-(1-Aminoethyl)benzotrifluoride - Introduction
Benzenemethanamine, a-methyl-2-(trifluoromethyl)-is an organic compound with the chemical formula C9H10F3N. It is a colorless liquid with a benzene fragrance. The following is a detailed description of the properties, uses, preparation and safety information of the compound:
Nature:
-Appearance: colorless liquid
-Molecular weight: 189.18g/mol
-Melting point:-46 ℃
-Boiling point: 197-199 ℃
-Flash Point: 77 ℃
-Density: 1.199 g/mL
-Solubility: Soluble in common organic solvents, such as alcohol, ether, ketone, etc
Use:
- Benzenemethanamine, a-methyl-2-(trifluoromethyl)-is mainly used as a reagent in organic synthesis. It can be used as an antagonistic agent for hydrofluoric acid, protonating reagents and acid-catalyzed reactions. At the same time, it can also be used to synthesize new drugs and pesticides.
Method:
-Benzenemethanamine, a-methyl-2-(trifluoromethyl)-can be prepared by the following steps-:
1. Benzyl bromide reacts with dimethylformamide in an ice bath to generate formyl benzylamine.
2. The formylbenzylamine reacts with trifluoromethyl borate under alkaline conditions to generate Benzenemethanamine, a-methyl-2-(trifluoromethyl)-.
Safety Information:
- Benzenemethanamine, a-methyl-2-(trifluoromethyl)-The following safety precautions should be paid attention to during operation and storage:
-It is an irritating compound, avoid contact with skin and eyes. Wear appropriate personal protective equipment such as gloves, goggles or face shield when using.
-Avoid inhaling gases or vapors from solutions, ensure well-ventilated workplaces or wear respiratory protective equipment.
-Avoid contact with oxidants and strong acids to prevent dangerous reactions.
-Follow correct operating procedures during use, and store and handle the compound properly. In case of accidental leakage or splashing, take appropriate emergency measures immediately and seek medical help.
Nature:
-Appearance: colorless liquid
-Molecular weight: 189.18g/mol
-Melting point:-46 ℃
-Boiling point: 197-199 ℃
-Flash Point: 77 ℃
-Density: 1.199 g/mL
-Solubility: Soluble in common organic solvents, such as alcohol, ether, ketone, etc
Use:
- Benzenemethanamine, a-methyl-2-(trifluoromethyl)-is mainly used as a reagent in organic synthesis. It can be used as an antagonistic agent for hydrofluoric acid, protonating reagents and acid-catalyzed reactions. At the same time, it can also be used to synthesize new drugs and pesticides.
Method:
-Benzenemethanamine, a-methyl-2-(trifluoromethyl)-can be prepared by the following steps-:
1. Benzyl bromide reacts with dimethylformamide in an ice bath to generate formyl benzylamine.
2. The formylbenzylamine reacts with trifluoromethyl borate under alkaline conditions to generate Benzenemethanamine, a-methyl-2-(trifluoromethyl)-.
Safety Information:
- Benzenemethanamine, a-methyl-2-(trifluoromethyl)-The following safety precautions should be paid attention to during operation and storage:
-It is an irritating compound, avoid contact with skin and eyes. Wear appropriate personal protective equipment such as gloves, goggles or face shield when using.
-Avoid inhaling gases or vapors from solutions, ensure well-ventilated workplaces or wear respiratory protective equipment.
-Avoid contact with oxidants and strong acids to prevent dangerous reactions.
-Follow correct operating procedures during use, and store and handle the compound properly. In case of accidental leakage or splashing, take appropriate emergency measures immediately and seek medical help.
Last Update：2024-04-09 19:05:48
![1-[2-(Trifluoromethyl)phenyl]ethylamine, 2-(1-Aminoethyl)benzotrifluoride](http://res.chembk.com/assets/str/2d/2/27/273384-78-4.png)
Supplier List
Product Name: (RS)-1-[2-(TRIFLUOROMETHYL)PHENYL]ETHYLAMINE Visit Supplier Webpage Request for quotation
CAS: 273384-78-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 273384-78-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: (RS)-1-[2-(TRIFLUOROMETHYL)PHENYL]ETHYLAMINE Visit Supplier Webpage Request for quotation
CAS: 273384-78-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 273384-78-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History